logoDocumentation
StandardsGuides

Banff Changes

This document specifies the changes in Avalanche “Banff”, which was released in AvalancheGo v1.9.x.

Block Changes

Apricot

Apricot allows the following block types with the following content:

  • Standard Blocks may contain multiple transactions of the following types:
    • CreateChainTx
    • CreateSubnetTx
    • ImportTx
    • ExportTx
  • Proposal Blocks may contain a single transaction of the following types:
    • AddValidatorTx
    • AddDelegatorTx
    • AddSubnetValidatorTx
    • RewardValidatorTx
    • AdvanceTimeTx
  • Options Blocks, that is Commit Block and Abort Block do not contain any transactions.

Each block has a header containing:

  • ParentID
  • Height

Banff

Banff allows the following block types with the following content:

  • Standard Blocks may contain multiple transactions of the following types:

    • CreateChainTx
    • CreateSubnetTx
    • ImportTx
    • ExportTx
    • AddValidatorTx
    • AddDelegatorTx
    • AddSubnetValidatorTx
    • RemoveSubnetValidatorTx
    • TransformSubnetTx
    • AddPermissionlessValidatorTx
    • AddPermissionlessDelegatorTx
  • Proposal Blocks may contain a single transaction of the following types:

    • RewardValidatorTx
  • Options blocks, that is Commit Block and Abort Block do not contain any transactions.

Note that each block has an header containing:

  • ParentID
  • Height
  • Time

So the two main differences with respect to Apricot are:

  • AddValidatorTx, AddDelegatorTx, AddSubnetValidatorTx are included into Standard Blocks rather than Proposal Blocks so that they don't need to be voted on (that is followed by a Commit/Abort Block).
  • New Transaction types: RemoveSubnetValidatorTx, TransformSubnetTx, AddPermissionlessValidatorTx, and AddPermissionlessDelegatorTx have been added into Standard Blocks.
  • Block timestamp is explicitly serialized into block header, to allow chain time update.

New Transactions

RemoveSubnetValidatorTx

type RemoveSubnetValidatorTx struct {
	BaseTx `serialize:"true"`
	// The node to remove from the subnet.
	NodeID ids.NodeID `serialize:"true" json:"nodeID"`
	// The subnet to remove the node from.
	Subnet ids.ID `serialize:"true" json:"subnet"`
	// Proves that the issuer has the right to remove the node from the subnet.
	SubnetAuth verify.Verifiable `serialize:"true" json:"subnetAuthorization"`
}

TransformSubnetTx

type TransformSubnetTx struct {
	// Metadata, inputs and outputs
	BaseTx `serialize:"true"`
	// ID of the Subnet to transform
	// Restrictions:
	// - Must not be the Primary Network ID
	Subnet ids.ID `serialize:"true" json:"subnetID"`
	// Asset to use when staking on the Subnet
	// Restrictions:
	// - Must not be the Empty ID
	// - Must not be the AVAX ID
	AssetID ids.ID `serialize:"true" json:"assetID"`
	// Amount to initially specify as the current supply
	// Restrictions:
	// - Must be > 0
	InitialSupply uint64 `serialize:"true" json:"initialSupply"`
	// Amount to specify as the maximum token supply
	// Restrictions:
	// - Must be >= [InitialSupply]
	MaximumSupply uint64 `serialize:"true" json:"maximumSupply"`
	// MinConsumptionRate is the rate to allocate funds if the validator's stake
	// duration is 0
	MinConsumptionRate uint64 `serialize:"true" json:"minConsumptionRate"`
	// MaxConsumptionRate is the rate to allocate funds if the validator's stake
	// duration is equal to the minting period
	// Restrictions:
	// - Must be >= [MinConsumptionRate]
	// - Must be <= [reward.PercentDenominator]
	MaxConsumptionRate uint64 `serialize:"true" json:"maxConsumptionRate"`
	// MinValidatorStake is the minimum amount of funds required to become a
	// validator.
	// Restrictions:
	// - Must be > 0
	// - Must be <= [InitialSupply]
	MinValidatorStake uint64 `serialize:"true" json:"minValidatorStake"`
	// MaxValidatorStake is the maximum amount of funds a single validator can
	// be allocated, including delegated funds.
	// Restrictions:
	// - Must be >= [MinValidatorStake]
	// - Must be <= [MaximumSupply]
	MaxValidatorStake uint64 `serialize:"true" json:"maxValidatorStake"`
	// MinStakeDuration is the minimum number of seconds a staker can stake for.
	// Restrictions:
	// - Must be > 0
	MinStakeDuration uint32 `serialize:"true" json:"minStakeDuration"`
	// MaxStakeDuration is the maximum number of seconds a staker can stake for.
	// Restrictions:
	// - Must be >= [MinStakeDuration]
	// - Must be <= [GlobalMaxStakeDuration]
	MaxStakeDuration uint32 `serialize:"true" json:"maxStakeDuration"`
	// MinDelegationFee is the minimum percentage a validator must charge a
	// delegator for delegating.
	// Restrictions:
	// - Must be <= [reward.PercentDenominator]
	MinDelegationFee uint32 `serialize:"true" json:"minDelegationFee"`
	// MinDelegatorStake is the minimum amount of funds required to become a
	// delegator.
	// Restrictions:
	// - Must be > 0
	MinDelegatorStake uint64 `serialize:"true" json:"minDelegatorStake"`
	// MaxValidatorWeightFactor is the factor which calculates the maximum
	// amount of delegation a validator can receive.
	// Note: a value of 1 effectively disables delegation.
	// Restrictions:
	// - Must be > 0
	MaxValidatorWeightFactor byte `serialize:"true" json:"maxValidatorWeightFactor"`
	// UptimeRequirement is the minimum percentage a validator must be online
	// and responsive to receive a reward.
	// Restrictions:
	// - Must be <= [reward.PercentDenominator]
	UptimeRequirement uint32 `serialize:"true" json:"uptimeRequirement"`
	// Authorizes this transformation
	SubnetAuth verify.Verifiable `serialize:"true" json:"subnetAuthorization"`
}

AddPermissionlessValidatorTx

type AddPermissionlessValidatorTx struct {
	// Metadata, inputs and outputs
	BaseTx `serialize:"true"`
	// Describes the validator
	Validator validator.Validator `serialize:"true" json:"validator"`
	// ID of the subnet this validator is validating
	Subnet ids.ID `serialize:"true" json:"subnet"`
	// Where to send staked tokens when done validating
	StakeOuts []*avax.TransferableOutput `serialize:"true" json:"stake"`
	// Where to send validation rewards when done validating
	ValidatorRewardsOwner fx.Owner `serialize:"true" json:"validationRewardsOwner"`
	// Where to send delegation rewards when done validating
	DelegatorRewardsOwner fx.Owner `serialize:"true" json:"delegationRewardsOwner"`
	// Fee this validator charges delegators as a percentage, times 10,000
	// For example, if this validator has DelegationShares=300,000 then they
	// take 30% of rewards from delegators
	DelegationShares uint32 `serialize:"true" json:"shares"`
}

AddPermissionlessDelegatorTx

type AddPermissionlessDelegatorTx struct {
	// Metadata, inputs and outputs
	BaseTx `serialize:"true"`
	// Describes the validator
	Validator validator.Validator `serialize:"true" json:"validator"`
	// ID of the subnet this validator is validating
	Subnet ids.ID `serialize:"true" json:"subnet"`
	// Where to send staked tokens when done validating
	Stake []*avax.TransferableOutput `serialize:"true" json:"stake"`
	// Where to send staking rewards when done validating
	RewardsOwner fx.Owner `serialize:"true" json:"rewardsOwner"`
}

New TypeIDs

ApricotProposalBlock = 0
ApricotAbortBlock = 1
ApricotCommitBlock = 2
ApricotStandardBlock = 3
ApricotAtomicBlock = 4

secp256k1fx.TransferInput = 5
secp256k1fx.MintOutput = 6
secp256k1fx.TransferOutput = 7
secp256k1fx.MintOperation = 8
secp256k1fx.Credential = 9
secp256k1fx.Input = 10
secp256k1fx.OutputOwners = 11

AddValidatorTx = 12
AddSubnetValidatorTx = 13
AddDelegatorTx = 14
CreateChainTx = 15
CreateSubnetTx = 16
ImportTx = 17
ExportTx = 18
AdvanceTimeTx = 19
RewardValidatorTx = 20

stakeable.LockIn = 21
stakeable.LockOut = 22

RemoveSubnetValidatorTx = 23
TransformSubnetTx = 24
AddPermissionlessValidatorTx = 25
AddPermissionlessDelegatorTx = 26

EmptyProofOfPossession = 27
BLSProofOfPossession   = 28

BanffProposalBlock = 29
BanffAbortBlock = 30
BanffCommitBlock = 31
BanffStandardBlock = 32

Last updated on

On this page

Edit on Github