logoDocumentation
Exchange Chain

Transaction Format

This file is meant to be the single source of truth for how we serialize transactions in the Avalanche Virtual Machine (AVM). This document uses the primitive serialization format for packing and secp256k1 for cryptographic user identification.

Codec ID

Some data is prepended with a codec ID (unt16) that denotes how the data should be deserialized. Right now, the only valid codec ID is 0 (0x00 0x00).

Transferable Output

Transferable outputs wrap an output with an asset ID.

What Transferable Output Contains

A transferable output contains an AssetID and an Output.

Gantt Transferable Output Specification

+----------+----------+-------------------------+
| asset_id : [32]byte |                32 bytes |
+----------+----------+-------------------------+
| output   : Output   |      size(output) bytes |
+----------+----------+-------------------------+
                      | 32 + size(output) bytes |
                      +-------------------------+

Proto Transferable Output Specification

message TransferableOutput {
    bytes asset_id = 1; // 32 bytes
    Output output = 2;  // size(output)
}

Transferable Output Example

Let's make a transferable output:

  • AssetID: 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
  • Output: "Example SECP256K1 Transfer Output from below"
[
    AssetID <- 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
    Output  <- 0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
]
=
[
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // output:
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Transferable Input

Transferable inputs describe a specific UTXO with a provided transfer input.

What Transferable Input Contains

A transferable input contains a TxID, UTXOIndex AssetID and an Input.

  • TxID is a 32-byte array that defines which transaction this input is consuming an output from. Transaction IDs are calculated by taking sha256 of the bytes of the signed transaction.
  • UTXOIndex is an int that defines which UTXO this input is consuming in the specified transaction.
  • AssetID is a 32-byte array that defines which asset this input references.
  • Input is an input, as defined below. This can currently only be a SECP256K1 transfer input

Gantt Transferable Input Specification

+------------+----------+------------------------+
| tx_id      : [32]byte |               32 bytes |
+------------+----------+------------------------+
| utxo_index : int      |               04 bytes |
+------------+----------+------------------------+
| asset_id   : [32]byte |               32 bytes |
+------------+----------+------------------------+
| input      : Input    |      size(input) bytes |
+------------+----------+------------------------+
                        | 68 + size(input) bytes |
                        +------------------------+

Proto Transferable Input Specification

message TransferableInput {
    bytes tx_id = 1;       // 32 bytes
    uint32 utxo_index = 2; // 04 bytes
    bytes asset_id = 3;    // 32 bytes
    Input input = 4;       // size(input)
}

Transferable Input Example

Let's make a transferable input:

  • TxID: 0xf1e1d1c1b1a191817161514131211101f0e0d0c0b0a090807060504030201000
  • UTXOIndex: 5
  • AssetID: 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
  • Input: "Example SECP256K1 Transfer Input from below"
[
    TxID      <- 0xf1e1d1c1b1a191817161514131211101f0e0d0c0b0a090807060504030201000
    UTXOIndex <- 0x00000005
    AssetID   <- 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
    Input     <- 0x0000000500000000075bcd15000000020000000700000003
]
=
[
    // txID:
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    // utxoIndex:
    0x00, 0x00, 0x00, 0x05,
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // input:
    0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
    0x07, 0x5b, 0xcd, 0x15, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x07
]

Transferable Op

Transferable operations describe a set of UTXOs with a provided transfer operation. Only one Asset ID is able to be referenced per operation.

What Transferable Op Contains

A transferable operation contains an AssetID, UTXOIDs, and a TransferOp.

  • AssetID is a 32-byte array that defines which asset this operation changes.
  • UTXOIDs is an array of TxID-OutputIndex tuples. This array must be sorted in lexicographical order.
  • TransferOp is a transferable operation object.

Gantt Transferable Op Specification

+-------------+------------+------------------------------+
| asset_id    : [32]byte   |                     32 bytes |
+-------------+------------+------------------------------+
| utxo_ids    : []UTXOID   | 4 + 36 * len(utxo_ids) bytes |
+-------------+------------+------------------------------+
| transfer_op : TransferOp |      size(transfer_op) bytes |
+-------------+------------+------------------------------+
                           |   36 + 36 * len(utxo_ids)    |
                           |    + size(transfer_op) bytes |
                           +------------------------------+

Proto Transferable Op Specification

message UTXOID {
    bytes tx_id = 1;       // 32 bytes
    uint32 utxo_index = 2; // 04 bytes
}
message TransferableOp {
    bytes asset_id = 1;           // 32 bytes
    repeated UTXOID utxo_ids = 2; // 4 + 36 * len(utxo_ids) bytes
    TransferOp transfer_op = 3;   // size(transfer_op)
}

Transferable Op Example

Let's make a transferable operation:

  • AssetID: 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
  • UTXOIDs:
    • UTXOID:
      • TxID: 0xf1e1d1c1b1a191817161514131211101f0e0d0c0b0a090807060504030201000
      • UTXOIndex: 5
  • Op: "Example Transfer Op from below"
[
    AssetID   <- 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
    UTXOIDs   <- [
        {
            TxID:0xf1e1d1c1b1a191817161514131211101f0e0d0c0b0a090807060504030201000
            UTXOIndex:5
        }
    ]
    Op     <- 0x0000000d0000000200000003000000070000303900000003431100000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
]
=
[
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // number of utxoIDs:
    0x00, 0x00, 0x00, 0x01,
    // txID:
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    // utxoIndex:
    0x00, 0x00, 0x00, 0x05,
    // op:
    0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x03,
    0x43, 0x11, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
    0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61, 0xfb,
    0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8, 0x34,
    0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55, 0xc3,
    0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e, 0xde,
    0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89, 0x43,
    0xab, 0x08, 0x59,
]

Outputs

Outputs have four possible types: SECP256K1TransferOutput, SECP256K1MintOutput, NFTTransferOutput and NFTMintOutput.

SECP256K1 Mint Output

A secp256k1 mint output is an output that is owned by a collection of addresses.

What SECP256K1 Mint Output Contains

A secp256k1 Mint output contains a TypeID, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x00000006.
  • Locktime is a long that contains the Unix timestamp that this output can be spent after. The Unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt SECP256K1 Mint Output Specification

+-----------+------------+--------------------------------+
| type_id   : int        |                       4 bytes  |
+-----------+------------+--------------------------------+
| locktime  : long       |                       8 bytes  |
+-----------+------------+--------------------------------+
| threshold : int        |                       4 bytes  |
+-----------+------------+--------------------------------+
| addresses : [][20]byte |  4 + 20 * len(addresses) bytes |
+-----------+------------+--------------------------------+
                         | 20 + 20 * len(addresses) bytes |
                         +--------------------------------+

Proto SECP256K1 Mint Output Specification

message SECP256K1MintOutput {
    uint32 typeID = 1;            // 04 bytes
    uint64 locktime = 2;          // 08 bytes
    uint32 threshold = 3;         // 04 bytes
    repeated bytes addresses = 4; // 04 bytes + 20 bytes * len(addresses)
}

SECP256K1 Mint Output Example

Let's make a SECP256K1 mint output with:

  • TypeID: 6
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0x51025c61fbcfc078f69334f834be6dd26d55a955
  • 0xc3344128e060128ede3523a24a461c8943ab0859
[
    TypeID    <- 0x00000006
    Locktime  <- 0x000000000000d431
    Threshold <- 0x00000001
    Addresses <- [
        0x51025c61fbcfc078f69334f834be6dd26d55a955,
        0xc3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // typeID:
    0x00, 0x00, 0x00, 0x06,
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x02,
    // addrs[0]:
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55,
    // addrs[1]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

SECP256K1 Transfer Output

A secp256k1 transfer output allows for sending a quantity of an asset to a collection of addresses after a specified Unix time.

What SECP256K1 Transfer Output Contains

A secp256k1 transfer output contains a TypeID, Amount, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x00000007.
  • Amount is a long that specifies the quantity of the asset that this output owns. Must be positive.
  • Locktime is a long that contains the Unix timestamp that this output can be spent after. The Unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt SECP256K1 Transfer Output Specification

+-----------+------------+--------------------------------+
| type_id   : int        |                        4 bytes |
+-----------+------------+--------------------------------+
| amount    : long       |                        8 bytes |
+-----------+------------+--------------------------------+
| locktime  : long       |                        8 bytes |
+-----------+------------+--------------------------------+
| threshold : int        |                        4 bytes |
+-----------+------------+--------------------------------+
| addresses : [][20]byte |  4 + 20 * len(addresses) bytes |
+-----------+------------+--------------------------------+
                         | 28 + 20 * len(addresses) bytes |
                         +--------------------------------+

Proto SECP256K1 Transfer Output Specification

message SECP256K1TransferOutput {
    uint32 typeID = 1;            // 04 bytes
    uint64 amount = 2;            // 08 bytes
    uint64 locktime = 3;          // 08 bytes
    uint32 threshold = 4;         // 04 bytes
    repeated bytes addresses = 5; // 04 bytes + 20 bytes * len(addresses)
}

SECP256K1 Transfer Output Example

Let's make a secp256k1 transfer output with:

  • TypeID: 7
  • Amount: 12345
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0x51025c61fbcfc078f69334f834be6dd26d55a955
  • 0xc3344128e060128ede3523a24a461c8943ab0859
[
    TypeID    <- 0x00000007
    Amount    <- 0x0000000000003039
    Locktime  <- 0x000000000000d431
    Threshold <- 0x00000001
    Addresses <- [
        0x51025c61fbcfc078f69334f834be6dd26d55a955,
        0xc3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // typeID:
    0x00, 0x00, 0x00, 0x07,
    // amount:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x39,
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x02,
    // addrs[0]:
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55,
    // addrs[1]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

NFT Mint Output

An NFT mint output is an NFT that is owned by a collection of addresses.

What NFT Mint Output Contains

An NFT Mint output contains a TypeID, GroupID, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x0000000a.
  • GroupID is an int that specifies the group this NFT is issued to.
  • Locktime is a long that contains the Unix timestamp that this output can be spent after. The Unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt NFT Mint Output Specification

+-----------+------------+--------------------------------+
| type_id   : int        |                        4 bytes |
+-----------+------------+--------------------------------+
| group_id  : int        |                        4 bytes |
+-----------+------------+--------------------------------+
| locktime  : long       |                        8 bytes |
+-----------+------------+--------------------------------+
| threshold : int        |                        4 bytes |
+-----------+------------+--------------------------------+
| addresses : [][20]byte |  4 + 20 * len(addresses) bytes |
+-----------+------------+--------------------------------+
                         | 24 + 20 * len(addresses) bytes |
                         +--------------------------------+

Proto NFT Mint Output Specification

message NFTMintOutput {
    uint32 typeID = 1;            // 04 bytes
    uint32 group_id = 2;          // 04 bytes
    uint64 locktime = 3;          // 08 bytes
    uint32 threshold = 4;         // 04 bytes
    repeated bytes addresses = 5; // 04 bytes + 20 bytes * len(addresses)
}

NFT Mint Output Example

Let's make an NFT mint output with:

  • TypeID: 10
  • GroupID: 12345
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0x51025c61fbcfc078f69334f834be6dd26d55a955
  • 0xc3344128e060128ede3523a24a461c8943ab0859
[
    TypeID    <- 0x0000000a
    GroupID   <- 0x00003039
    Locktime  <- 0x000000000000d431
    Threshold <- 0x00000001
    Addresses <- [
        0x51025c61fbcfc078f69334f834be6dd26d55a955,
        0xc3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // TypeID
    0x00, 0x00, 0x00, 0x0a,
    // groupID:
    0x00, 0x00, 0x30, 0x39,
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x02,
    // addrs[0]:
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55,
    // addrs[1]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

NFT Transfer Output

An NFT transfer output is an NFT that is owned by a collection of addresses.

What NFT Transfer Output Contains

An NFT transfer output contains a TypeID, GroupID, Payload, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x0000000b.
  • GroupID is an int that specifies the group this NFT was issued with.
  • Payload is an arbitrary string of bytes no long longer than 1024 bytes.
  • Locktime is a long that contains the Unix timestamp that this output can be spent after. The Unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt NFT Transfer Output Specification

+-----------+------------+-------------------------------+
| type_id   : int        |                       4 bytes |
+-----------+------------+-------------------------------+
| group_id  : int        |                       4 bytes |
+-----------+------------+-------------------------------+
| payload   : []byte     |        4 + len(payload) bytes |
+-----------+------------+-------------------------------+
| locktime  : long       |                       8 bytes |
+-----------+------------+-------------------------------+
| threshold : int        |                       4 bytes |
+-----------+------------+-------------------------------+
| addresses : [][20]byte | 4 + 20 * len(addresses) bytes |
+-----------+------------+-------------------------------+
                         |             28 + len(payload) |
                         |  + 20 * len(addresses) bytes  |
                         +-------------------------------+

Proto NFT Transfer Output Specification

message NFTTransferOutput {
    uint32 typeID = 1;            // 04 bytes
    uint32 group_id = 2;          // 04 bytes
    bytes payload = 3;            // 04 bytes + len(payload)
    uint64 locktime = 4           // 08 bytes
    uint32 threshold = 5;         // 04 bytes
    repeated bytes addresses = 6; // 04 bytes + 20 bytes * len(addresses)
}

NFT Transfer Output Example

Let's make an NFT transfer output with:

  • TypeID: 11
  • GroupID: 12345
  • Payload: NFT Payload
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0x51025c61fbcfc078f69334f834be6dd26d55a955
  • 0xc3344128e060128ede3523a24a461c8943ab0859
[
    TypeID    <- 0x0000000b
    GroupID   <- 0x00003039
    Payload   <- 0x4e4654205061796c6f6164
    Locktime  <- 0x000000000000d431
    Threshold <- 0x00000001
    Addresses <- [
        0x51025c61fbcfc078f69334f834be6dd26d55a955,
        0xc3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // TypeID:
    0x00, 0x00, 0x00, 0x0b,
    // groupID:
    0x00, 0x00, 0x30, 0x39,
    // length of payload:
    0x00, 0x00, 0x00, 0x0b,
    // payload:
    0x4e, 0x46, 0x54, 0x20, 0x50, 0x61, 0x79, 0x6c,
    0x6f, 0x61, 0x64,
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x02,
    // addrs[0]:
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55,
    // addrs[1]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Inputs

Inputs have one possible type: SECP256K1TransferInput.

SECP256K1 Transfer Input

A secp256k1 transfer input allows for spending an unspent secp256k1 transfer output.

What SECP256K1 Transfer Input Contains

A secp256k1 transfer input contains an Amount and AddressIndices.

  • TypeID is the ID for this input type. It is 0x00000005.
  • Amount is a long that specifies the quantity that this input should be consuming from the UTXO. Must be positive. Must be equal to the amount specified in the UTXO.
  • AddressIndices is a list of unique ints that define the private keys that are being used to spend the UTXO. Each UTXO has an array of addresses that can spend the UTXO. Each int represents the index in this address array that will sign this transaction. The array must be sorted low to high.

Gantt SECP256K1 Transfer Input Specification

+-------------------------+-------------------------------------+
| type_id         : int   |                             4 bytes |
+-----------------+-------+-------------------------------------+
| amount          : long  |                             8 bytes |
+-----------------+-------+-------------------------------------+
| address_indices : []int |  4 + 4 * len(address_indices) bytes |
+-----------------+-------+-------------------------------------+
                          | 16 + 4 * len(address_indices) bytes |
                          +-------------------------------------+

Proto SECP256K1 Transfer Input Specification

message SECP256K1TransferInput {
    uint32 typeID = 1;                   // 04 bytes
    uint64 amount = 2;                   // 08 bytes
    repeated uint32 address_indices = 3; // 04 bytes + 04 bytes * len(address_indices)
}

SECP256K1 Transfer Input Example

Let's make a payment input with:

  • TypeId: 5
  • Amount: 123456789
  • AddressIndices: [3,7]
[
    TypeID         <- 0x00000005
    Amount         <- 123456789 = 0x00000000075bcd15,
    AddressIndices <- [0x00000003, 0x00000007]
]
=
[
    // type id:
    0x00, 0x00, 0x00, 0x05,
    // amount:
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    // length:
    0x00, 0x00, 0x00, 0x02,
    // sig[0]
    0x00, 0x00, 0x00, 0x03,
    // sig[1]
    0x00, 0x00, 0x00, 0x07,
]

Operations

Operations have three possible types: SECP256K1MintOperation, NFTMintOp, and NFTTransferOp.

SECP256K1 Mint Operation

A secp256k1 mint operation consumes a SECP256K1 mint output, creates a new mint output and sends a transfer output to a new set of owners.

What SECP256K1 Mint Operation Contains

A secp256k1 Mint operation contains a TypeID, AddressIndices, MintOutput, and TransferOutput.

  • TypeID is the ID for this output type. It is 0x00000008.
  • AddressIndices is a list of unique ints that define the private keys that are being used to spend the UTXO. Each UTXO has an array of addresses that can spend the UTXO. Each int represents the index in this address array that will sign this transaction. The array must be sorted low to high.
  • MintOutput is a SECP256K1 Mint output.
  • TransferOutput is a SECP256K1 Transfer output.

Gantt SECP256K1 Mint Operation Specification

+----------------------------------+------------------------------------+
| type_id         : int            |                            4 bytes |
+----------------------------------+------------------------------------+
| address_indices : []int          | 4 + 4 * len(address_indices) bytes |
+----------------------------------+------------------------------------+
| mint_output     : MintOutput     |            size(mint_output) bytes |
+----------------------------------+------------------------------------+
| transfer_output : TransferOutput |        size(transfer_output) bytes |
+----------------------------------+------------------------------------+
                                   |       8 + 4 * len(address_indices) |
                                   |                + size(mint_output) |
                                   |      + size(transfer_output) bytes |
                                   +------------------------------------+

Proto SECP256K1 Mint Operation Specification

message SECP256K1MintOperation {
    uint32 typeID = 1;                   // 4 bytes
    repeated uint32 address_indices = 2; // 04 bytes + 04 bytes * len(address_indices)
    MintOutput mint_output = 3;          // size(mint_output
    TransferOutput transfer_output = 4;  // size(transfer_output)
}

SECP256K1 Mint Operation Example

Let's make a secp256k1 mint operation with:

  • TypeId: 8
  • AddressIndices:
  • 0x00000003
  • 0x00000007
  • MintOutput: "Example SECP256K1 Mint Output from above"
  • TransferOutput: "Example SECP256K1 Transfer Output from above"
[
    TypeID <- 0x00000008
    AddressIndices <- [0x00000003, 0x00000007]
    MintOutput <- 0x00000006000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c89
    TransferOutput <- 0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
]
=
[
    // typeID
    0x00, 0x00, 0x00, 0x08,
    // number of address_indices:
    0x00, 0x00, 0x00, 0x02,
    // address_indices[0]:
    0x00, 0x00, 0x00, 0x03,
    // address_indices[1]:
    0x00, 0x00, 0x00, 0x07,
    // mint output
    0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
    // transfer output
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

NFT Mint Op

An NFT mint operation consumes an NFT mint output and sends an unspent output to a new set of owners.

What NFT Mint Op Contains

An NFT mint operation contains a TypeID, AddressIndices, GroupID, Payload, and Output of addresses.

  • TypeID is the ID for this operation type. It is 0x0000000c.
  • AddressIndices is a list of unique ints that define the private keys that are being used to spend the UTXO. Each UTXO has an array of addresses that can spend the UTXO. Each int represents the index in this address array that will sign this transaction. The array must be sorted low to high.
  • GroupID is an int that specifies the group this NFT is issued to.
  • Payload is an arbitrary string of bytes no longer than 1024 bytes.
  • Output is not a TransferableOutput, but rather is a lock time, threshold, and an array of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt NFT Mint Op Specification

+------------------------------+------------------------------------+
| type_id         : int        |                            4 bytes |
+-----------------+------------+------------------------------------+
| address_indices : []int      | 4 + 4 * len(address_indices) bytes |
+-----------------+------------+------------------------------------+
| group_id        : int        |                            4 bytes |
+-----------------+------------+------------------------------------+
| payload         : []byte     |             4 + len(payload) bytes |
+-----------------+------------+------------------------------------+
| outputs         : []Output   |            4 + size(outputs) bytes |
+-----------------+------------+------------------------------------+
                               |                               20 + |
                               |         4 * len(address_indices) + |
                               |                     len(payload) + |
                               |                size(outputs) bytes |
                               +------------------------------------+

Proto NFT Mint Op Specification

message NFTMintOp {
    uint32 typeID = 1;                   // 04 bytes
    repeated uint32 address_indices = 2; // 04 bytes + 04 bytes * len(address_indices)
    uint32 group_id = 3;                 // 04 bytes
    bytes payload = 4;                   // 04 bytes + len(payload)
    repeated bytes outputs = 5;          // 04 bytes + size(outputs)
}

NFT Mint Op Example

Let's make an NFT mint operation with:

  • TypeId: 12
  • AddressIndices:
    • 0x00000003
    • 0x00000007
  • GroupID: 12345
  • Payload: 0x431100
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0xc3344128e060128ede3523a24a461c8943ab0859
[
    TypeID         <- 0x0000000c
    AddressIndices <- [
        0x00000003,
        0x00000007,
    ]
    GroupID        <- 0x00003039
    Payload        <- 0x431100
    Locktime       <- 0x000000000000d431
    Threshold      <- 0x00000001
    Addresses      <- [
        0xc3344128e060128ede3523a24a461c8943ab0859
    ]
]
=
[
    // Type ID
    0x00, 0x00, 0x00, 0x0c,
    // number of address indices:
    0x00, 0x00, 0x00, 0x02,
    // address index 0:
    0x00, 0x00, 0x00, 0x03,
    // address index 1:
    0x00, 0x00, 0x00, 0x07,
    // groupID:
    0x00, 0x00, 0x30, 0x39,
    // length of payload:
    0x00, 0x00, 0x00, 0x03,
    // payload:
    0x43, 0x11, 0x00,
    // number of outputs:
    0x00, 0x00, 0x00, 0x01,
    // outputs[0]
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x01,
    // addrs[0]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

NFT Transfer Op

An NFT transfer operation sends an unspent NFT transfer output to a new set of owners.

What NFT Transfer Op Contains

An NFT transfer operation contains a TypeID, AddressIndices and an untyped NFTTransferOutput.

  • TypeID is the ID for this output type. It is 0x0000000d.
  • AddressIndices is a list of unique ints that define the private keys that are being used to spend the UTXO. Each UTXO has an array of addresses that can spend the UTXO. Each int represents the index in this address array that will sign this transaction. The array must be sorted low to high.
  • NFTTransferOutput is the output of this operation and must be an NFT Transfer Output. This output doesn't have the TypeId, because the type is known by the context of being in this operation.

Gantt NFT Transfer Op Specification

+------------------------------+------------------------------------+
| type_id         : int        |                            4 bytes |
+-----------------+------------+------------------------------------+
| address_indices : []int      | 4 + 4 * len(address_indices) bytes |
+-----------------+------------+------------------------------------+
| group_id        : int        |                            4 bytes |
+-----------------+------------+------------------------------------+
| payload         : []byte     |             4 + len(payload) bytes |
+-----------------+------------+------------------------------------+
| locktime        : long       |                            8 bytes |
+-----------+------------+------------------------------------------+
| threshold       : int        |                            4 bytes |
+-----------------+------------+------------------------------------+
| addresses       : [][20]byte |      4 + 20 * len(addresses) bytes |
+-----------------+------------+------------------------------------+
                               |                  36 + len(payload) |
                               |        + 4 * len(address_indices)  |
                               |        + 20 * len(addresses) bytes |
                               +------------------------------------+

Proto NFT Transfer Op Specification

message NFTTransferOp {
    uint32 typeID = 1;                   // 04 bytes
    repeated uint32 address_indices = 2; // 04 bytes + 04 bytes * len(address_indices)
    uint32 group_id = 3;                 // 04 bytes
    bytes payload = 4;                   // 04 bytes + len(payload)
    uint64 locktime = 5;                 // 08 bytes
    uint32 threshold = 6;                // 04 bytes
    repeated bytes addresses = 7;        // 04 bytes + 20 bytes * len(addresses)
}

NFT Transfer Op Example

Let's make an NFT transfer operation with:

  • TypeID: 13
  • AddressIndices:
  • 0x00000007
  • 0x00000003
  • GroupID: 12345
  • Payload: 0x431100
  • Locktime: 54321
  • Threshold: 1
  • Addresses:
  • 0xc3344128e060128ede3523a24a461c8943ab0859
  • 0x51025c61fbcfc078f69334f834be6dd26d55a955
[
    TypeID         <- 0x0000000d
    AddressIndices <- [
        0x00000007,
        0x00000003,
    ]
    GroupID        <- 0x00003039
    Payload        <- 0x431100
    Locktime       <- 0x000000000000d431
    Threshold      <- 00000001
    Addresses      <- [
        0x51025c61fbcfc078f69334f834be6dd26d55a955,
        0xc3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // Type ID
    0x00, 0x00, 0x00, 0x0d,
    // number of address indices:
    0x00, 0x00, 0x00, 0x02,
    // address index 0:
    0x00, 0x00, 0x00, 0x07,
    // address index 1:
    0x00, 0x00, 0x00, 0x03,
    // groupID:
    0x00, 0x00, 0x30, 0x39,
    // length of payload:
    0x00, 0x00, 0x00, 0x03,
    // payload:
    0x43, 0x11, 0x00,
    // locktime:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    // threshold:
    0x00, 0x00, 0x00, 0x01,
    // number of addresses:
    0x00, 0x00, 0x00, 0x02,
    // addrs[0]:
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55,
    // addrs[1]:
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Initial State

Initial state describes the initial state of an asset when it is created. It contains the ID of the feature extension that the asset uses, and a variable length array of outputs that denote the genesis UTXO set of the asset.

What Initial State Contains

Initial state contains a FxID and an array of Output.

  • FxID is an int that defines which feature extension this state is part of. For SECP256K1 assets, this is 0x00000000. For NFT assets, this is 0x00000001.
  • Outputs is a variable length array of outputs, as defined above.

Gantt Initial State Specification

+---------------+----------+-------------------------------+
| fx_id         : int      |                       4 bytes |
+---------------+----------+-------------------------------+
| outputs       : []Output |       4 + size(outputs) bytes |
+---------------+----------+-------------------------------+
                           |       8 + size(outputs) bytes |
                           +-------------------------------+

Proto Initial State Specification

message InitialState {
    uint32 fx_id = 1;                  // 04 bytes
    repeated Output outputs = 2;       // 04 + size(outputs) bytes
}

Initial State Example

Let's make an initial state:

  • FxID: 0x00000000
  • InitialState: ["Example SECP256K1 Transfer Output from above"]
[
    FxID <- 0x00000000
    InitialState  <- [
        0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // fxID:
    0x00, 0x00, 0x00, 0x00,
    // num outputs:
    0x00, 0x00, 0x00, 0x01,
    // output:
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Credentials

Credentials have two possible types: SECP256K1Credential, and NFTCredential. Each credential is paired with an Input or Operation. The order of the credentials match the order of the inputs or operations.

SECP256K1 Credential

A secp256k1 credential contains a list of 65-byte recoverable signatures.

What SECP256K1 Credential Contains

  • TypeID is the ID for this type. It is 0x00000009.
  • Signatures is an array of 65-byte recoverable signatures. The order of the signatures must match the input's signature indices.

Gantt SECP256K1 Credential Specification

+------------------------------+---------------------------------+
| type_id         : int        |                         4 bytes |
+-----------------+------------+---------------------------------+
| signatures      : [][65]byte |  4 + 65 * len(signatures) bytes |
+-----------------+------------+---------------------------------+
                               |  8 + 65 * len(signatures) bytes |
                               +---------------------------------+

Proto SECP256K1 Credential Specification

message SECP256K1Credential {
    uint32 typeID = 1;             // 4 bytes
    repeated bytes signatures = 2; // 4 bytes + 65 bytes * len(signatures)
}

SECP256K1 Credential Example

Let's make a payment input with:

  • TypeID: 9
  • signatures:
  • 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00
  • 0x404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00
[
    TypeID         <- 0x00000009
    Signatures <- [
        0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00,
        0x404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00,
    ]
]
=
[
    // Type ID
    0x00, 0x00, 0x00, 0x09,
    // length:
    0x00, 0x00, 0x00, 0x02,
    // sig[0]
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1e, 0x1d, 0x1f,
    0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
    0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2e, 0x2d, 0x2f,
    0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
    0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
    0x00,
    // sig[1]
    0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
    0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
    0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
    0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5e, 0x5d, 0x5f,
    0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
    0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6e, 0x6d, 0x6f,
    0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
    0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f,
    0x00,
]

NFT Credential

An NFT credential is the same as an secp256k1 credential with a different TypeID. The TypeID for an NFT credential is 0x0000000e.

Unsigned Transactions

Unsigned transactions contain the full content of a transaction with only the signatures missing. Unsigned transactions have four possible types: CreateAssetTx, OperationTx, ImportTx, and ExportTx. They all embed BaseTx, which contains common fields and operations.

Unsigned BaseTx

What Base TX Contains

A base TX contains a TypeID, NetworkID, BlockchainID, Outputs, Inputs, and Memo.

  • TypeID is the ID for this type. It is 0x00000000.
  • NetworkID is an int that defines which network this transaction is meant to be issued to. This value is meant to support transaction routing and is not designed for replay attack prevention.
  • BlockchainID is a 32-byte array that defines which blockchain this transaction was issued to. This is used for replay attack prevention for transactions that could potentially be valid across network or blockchain.
  • Outputs is an array of transferable output objects. Outputs must be sorted lexicographically by their serialized representation. The total quantity of the assets created in these outputs must be less than or equal to the total quantity of each asset consumed in the inputs minus the transaction fee.
  • Inputs is an array of transferable input objects. Inputs must be sorted and unique. Inputs are sorted first lexicographically by their TxID and then by the UTXOIndex from low to high. If there are inputs that have the same TxID and UTXOIndex, then the transaction is invalid as this would result in a double spend.
  • Memo Memo field contains arbitrary bytes, up to 256 bytes.

Gantt Base TX Specification

+--------------------------------------+-----------------------------------------+
| type_id       : int                  |                                 4 bytes |
+---------------+----------------------+-----------------------------------------+
| network_id    : int                  |                                 4 bytes |
+---------------+----------------------+-----------------------------------------+
| blockchain_id : [32]byte             |                                32 bytes |
+---------------+----------------------+-----------------------------------------+
| outputs       : []TransferableOutput |                 4 + size(outputs) bytes |
+---------------+----------------------+-----------------------------------------+
| inputs        : []TransferableInput  |                  4 + size(inputs) bytes |
+---------------+----------------------+-----------------------------------------+
| memo          : [256]byte            |                    4 + size(memo) bytes |
+---------------+----------------------+-----------------------------------------+
                          | 52 + size(outputs) + size(inputs) + size(memo) bytes |
                          +------------------------------------------------------+

Proto Base TX Specification

message BaseTx {
    uint32 typeID = 1;           // 04 bytes
    uint32 network_id = 2;       // 04 bytes
    bytes blockchain_id = 3;     // 32 bytes
    repeated Output outputs = 4; // 04 bytes + size(outs)
    repeated Input inputs = 5;   // 04 bytes + size(ins)
    bytes memo = 6;              // 04 bytes + size(memo)
}

Base TX Example

Let's make an base TX that uses the inputs and outputs from the previous examples:

  • TypeID: 0
  • NetworkID: 4
  • BlockchainID: 0xffffffffeeeeeeeeddddddddcccccccbbbbbbbbaaaaaaaa9999999988888888
  • Outputs:
    • "Example Transferable Output as defined above"
  • Inputs:
    • "Example Transferable Input as defined above"
  • Memo: 0x00010203
[
    TypeID       <- 0x00000000
    NetworkID    <- 0x00000004
    BlockchainID <- 0xffffffffeeeeeeeeddddddddcccccccbbbbbbbbaaaaaaaa9999999988888888
    Outputs      <- [
        0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
    ]
    Inputs       <- [
        0xf1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd15000000020000000700000003
    ]
    Memo <- 0x00010203
]
=
[
    // typeID
    0x00, 0x00, 0x00, 0x00,
    // networkID:
    0x00, 0x00, 0x00, 0x04,
    // blockchainID:
    0xff, 0xff, 0xff, 0xff, 0xee, 0xee, 0xee, 0xee,
    0xdd, 0xdd, 0xdd, 0xdd, 0xcc, 0xcc, 0xcc, 0xcc,
    0xbb, 0xbb, 0xbb, 0xbb, 0xaa, 0xaa, 0xaa, 0xaa,
    0x99, 0x99, 0x99, 0x99, 0x88, 0x88, 0x88, 0x88,
    // number of outputs:
    0x00, 0x00, 0x00, 0x01,
    // transferable output:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
    // number of inputs:
    0x00, 0x00, 0x00, 0x01,
    // transferable input:
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x03,
    // Memo length:
    0x00, 0x00, 0x00, 0x04,
    // Memo:
    0x00, 0x01, 0x02, 0x03,
]

Unsigned CreateAssetTx

What Unsigned Create Asset TX Contains

An unsigned create asset TX contains a BaseTx, Name, Symbol, Denomination, and InitialStates. The TypeID is 0x00000001.

  • BaseTx
  • Name is a human readable string that defines the name of the asset this transaction will create. The name is not guaranteed to be unique. The name must consist of only printable ASCII characters and must be no longer than 128 characters.
  • Symbol is a human readable string that defines the symbol of the asset this transaction will create. The symbol is not guaranteed to be unique. The symbol must consist of only printable ASCII characters and must be no longer than 4 characters.
  • Denomination is a byte that defines the divisibility of the asset this transaction will create. For example, the AVAX token is divisible into billionths. Therefore, the denomination of the AVAX token is 9. The denomination must be no more than 32.
  • InitialStates is a variable length array that defines the feature extensions this asset supports, and the initial state of those feature extensions.

Gantt Unsigned Create Asset TX Specification

+----------------+----------------+--------------------------------------+
| base_tx        : BaseTx         |                  size(base_tx) bytes |
+----------------+----------------+--------------------------------------+
| name           : string         |                  2 + len(name) bytes |
+----------------+----------------+--------------------------------------+
| symbol         : string         |                2 + len(symbol) bytes |
+----------------+----------------+--------------------------------------+
| denomination   : byte           |                              1 bytes |
+----------------+----------------+--------------------------------------+
| initial_states : []InitialState |       4 + size(initial_states) bytes |
+----------------+----------------+--------------------------------------+
                                  | size(base_tx) + size(initial_states) |
                                  |  + 9 + len(name) + len(symbol) bytes |
                                  +--------------------------------------+

Proto Unsigned Create Asset TX Specification

message CreateAssetTx {
    BaseTx base_tx = 1;                       // size(base_tx)
    string name = 2;                          // 2 bytes + len(name)
    name symbol = 3;                          // 2 bytes + len(symbol)
    uint8 denomination = 4;                   // 1 bytes
    repeated InitialState initial_states = 5; // 4 bytes + size(initial_states)
}

Unsigned Create Asset TX Example

Let's make an unsigned base TX that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with ID set to 1"
  • Name: Volatility Index
  • Symbol: VIX
  • Denomination: 2
  • InitialStates:
  • "Example Initial State as defined above"
[
    BaseTx        <- 0x0000000100000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
    Name          <- 0x0010566f6c6174696c69747920496e646578
    Symbol        <- 0x0003564958
    Denomination  <- 0x02
    InitialStates <- [
        0x0000000000000001000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // base tx:
    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04,
    0xff, 0xff, 0xff, 0xff, 0xee, 0xee, 0xee, 0xee,
    0xdd, 0xdd, 0xdd, 0xdd,
    0xcc, 0xcc, 0xcc, 0xcc, 0xbb, 0xbb, 0xbb, 0xbb,
    0xaa, 0xaa, 0xaa, 0xaa, 0x99, 0x99, 0x99, 0x99,
    0x88, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59, 0x00, 0x00, 0x00, 0x01,
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04,
    0x00, 0x01, 0x02, 0x03
    // name:
    0x00, 0x10, 0x56, 0x6f, 0x6c, 0x61, 0x74, 0x69,
    0x6c, 0x69, 0x74, 0x79, 0x20, 0x49, 0x6e, 0x64,
    0x65, 0x78,
    // symbol length:
    0x00, 0x03,
    // symbol:
    0x56, 0x49, 0x58,
    // denomination:
    0x02,
    // number of InitialStates:
    0x00, 0x00, 0x00, 0x01,
    // InitialStates[0]:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Unsigned OperationTx

What Unsigned Operation TX Contains

An unsigned operation TX contains a BaseTx, and Ops. The TypeID for this type is 0x00000002.

Gantt Unsigned Operation TX Specification

+---------+------------------+-------------------------------------+
| base_tx : BaseTx           |                 size(base_tx) bytes |
+---------+------------------+-------------------------------------+
| ops     : []TransferableOp |                 4 + size(ops) bytes |
+---------+------------------+-------------------------------------+
                             | 4 + size(ops) + size(base_tx) bytes |
                             +-------------------------------------+

Proto Unsigned Operation TX Specification

message OperationTx {
    BaseTx base_tx = 1;          // size(base_tx)
    repeated TransferOp ops = 2; // 4 bytes + size(ops)
}

Unsigned Operation TX Example

Let's make an unsigned operation TX that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx above" with TypeID set to 2
  • Ops: ["Example Transferable Op as defined above"]
[
    BaseTx <- 0x0000000200000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
    Ops <- [
        0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f00000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a090807060504030201000000000050000000d0000000200000003000000070000303900000003431100000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // base tx:
    0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x04, 0xff, 0xff, 0xff, 0xff,
    0xee, 0xee, 0xee, 0xee, 0xdd, 0xdd, 0xdd, 0xdd,
    0xcc, 0xcc, 0xcc, 0xcc, 0xbb, 0xbb, 0xbb, 0xbb,
    0xaa, 0xaa, 0xaa, 0xaa, 0x99, 0x99, 0x99, 0x99,
    0x88, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59, 0x00, 0x00, 0x00, 0x01,
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04,
    0x00, 0x01, 0x02, 0x03
    // number of operations:
    0x00, 0x00, 0x00, 0x01,
    // transfer operation:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x01, 0xf1, 0xe1, 0xd1, 0xc1,
    0xb1, 0xa1, 0x91, 0x81, 0x71, 0x61, 0x51, 0x41,
    0x31, 0x21, 0x11, 0x01, 0xf0, 0xe0, 0xd0, 0xc0,
    0xb0, 0xa0, 0x90, 0x80, 0x70, 0x60, 0x50, 0x40,
    0x30, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x03,
    0x43, 0x11, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
    0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61, 0xfb,
    0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8, 0x34,
    0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55, 0xc3,
    0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e, 0xde,
    0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89, 0x43,
    0xab, 0x08, 0x59,
]

Unsigned ImportTx

What Unsigned Import TX Contains

An unsigned import TX contains a BaseTx, SourceChain and Ins. * The TypeIDfor this type is 0x00000003.

  • BaseTx
  • SourceChain is a 32-byte source blockchain ID.
  • Ins is a variable length array of Transferable Inputs.

Gantt Unsigned Import TX Specification

+---------+----------------------+-----------------------------+
| base_tx : BaseTx               |         size(base_tx) bytes |
+-----------------+--------------+-----------------------------+
| source_chain    : [32]byte     |                    32 bytes |
+---------+----------------------+-----------------------------+
| ins     : []TransferIn         |         4 + size(ins) bytes |
+---------+----------------------+-----------------------------+
                        | 36 + size(ins) + size(base_tx) bytes |
                        +--------------------------------------+

Proto Unsigned Import TX Specification

message ImportTx {
    BaseTx base_tx = 1;          // size(base_tx)
    bytes source_chain = 2;      // 32 bytes
    repeated TransferIn ins = 3; // 4 bytes + size(ins)
}

Unsigned Import TX Example

Let's make an unsigned import TX that uses the inputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above", but with TypeID set to 3
  • SourceChain: 0x0000000000000000000000000000000000000000000000000000000000000000
  • Ins: "Example SECP256K1 Transfer Input as defined above"
[
    BaseTx        <- 0x0000000300000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
    SourceChain <- 0x0000000000000000000000000000000000000000000000000000000000000000
    Ins <- [
        f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd15000000020000000300000007,
    ]
]
=
[
    // base tx:
    0x00, 0x00, 0x00, 0x03,
    0x00, 0x00, 0x00, 0x04, 0xff, 0xff, 0xff, 0xff,
    0xee, 0xee, 0xee, 0xee, 0xdd, 0xdd, 0xdd, 0xdd,
    0xcc, 0xcc, 0xcc, 0xcc, 0xbb, 0xbb, 0xbb, 0xbb,
    0xaa, 0xaa, 0xaa, 0xaa, 0x99, 0x99, 0x99, 0x99,
    0x88, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59, 0x00, 0x00, 0x00, 0x01,
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04,
    0x00, 0x01, 0x02, 0x03
    // source chain:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    // input count:
    0x00, 0x00, 0x00, 0x01,
    // txID:
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    // utxoIndex:
    0x00, 0x00, 0x00, 0x05,
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // input:
    0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
    0x07, 0x5b, 0xcd, 0x15, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x07,
]

Unsigned ExportTx

What Unsigned Export TX Contains

An unsigned export TX contains a BaseTx, DestinationChain, and Outs. The TypeID for this type is 0x00000004.

  • DestinationChain is the 32 byte ID of the chain where the funds are being exported to.
  • Outs is a variable length array of Transferable Outputs.

Gantt Unsigned Export TX Specification

+-------------------+---------------+--------------------------------------+
| base_tx           : BaseTx        |                  size(base_tx) bytes |
+-------------------+---------------+--------------------------------------+
| destination_chain : [32]byte      |                             32 bytes |
+-------------------+---------------+--------------------------------------+
| outs              : []TransferOut |                 4 + size(outs) bytes |
+-------------------+---------------+--------------------------------------+
                          | 36 + size(outs) + size(base_tx) bytes |
                          +---------------------------------------+

Proto Unsigned Export TX Specification

message ExportTx {
    BaseTx base_tx = 1;            // size(base_tx)
    bytes destination_chain = 2;   // 32 bytes
    repeated TransferOut outs = 3; // 4 bytes + size(outs)
}

Unsigned Export TX Example

Let's make an unsigned export TX that uses the outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above", but with TypeID set to 4
  • DestinationChain: 0x0000000000000000000000000000000000000000000000000000000000000000
  • Outs: "Example SECP256K1 Transfer Output as defined above"
[
    BaseTx           <- 0x0000000400000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
    DestinationChain <- 0x0000000000000000000000000000000000000000000000000000000000000000
    Outs <- [
        000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
    ]
]
=
[
    // base tx:
    0x00, 0x00, 0x00, 0x04
    0x00, 0x00, 0x00, 0x04, 0xff, 0xff, 0xff, 0xff,
    0xee, 0xee, 0xee, 0xee, 0xdd, 0xdd, 0xdd, 0xdd,
    0xcc, 0xcc, 0xcc, 0xcc, 0xbb, 0xbb, 0xbb, 0xbb,
    0xaa, 0xaa, 0xaa, 0xaa, 0x99, 0x99, 0x99, 0x99,
    0x88, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59, 0x00, 0x00, 0x00, 0x01,
    0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
    0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
    0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
    0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04,
    0x00, 0x01, 0x02, 0x03
    // destination_chain:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    // outs[] count:
    0x00, 0x00, 0x00, 0x01,
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // output:
    0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x39,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02,
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55, 0xc3, 0x34, 0x41, 0x28,
    0xe0, 0x60, 0x12, 0x8e, 0xde, 0x35, 0x23, 0xa2,
    0x4a, 0x46, 0x1c, 0x89, 0x43, 0xab, 0x08, 0x59,
]

Signed Transaction

A signed transaction is an unsigned transaction with the addition of an array of credentials.

What Signed Transaction Contains

A signed transaction contains a CodecID, UnsignedTx, and Credentials.

  • CodecID The only current valid codec id is 00 00.
  • UnsignedTx is an unsigned transaction, as described above.
  • Credentials is an array of credentials. Each credential will be paired with the input in the same index at this credential.

Gantt Signed Transaction Specification

+---------------------+--------------+------------------------------------------------+
| codec_id            : uint16       |                                        2 bytes |
+---------------------+--------------+------------------------------------------------+
| unsigned_tx         : UnsignedTx   |                        size(unsigned_tx) bytes |
+---------------------+--------------+------------------------------------------------+
| credentials         : []Credential |                    4 + size(credentials) bytes |
+---------------------+--------------+------------------------------------------------+
                                     | 6 + size(unsigned_tx) + len(credentials) bytes |
                                     +------------------------------------------------+

Proto Signed Transaction Specification

message Tx {
    uint16 codec_id = 1;                 // 2 bytes
    UnsignedTx unsigned_tx = 2;          // size(unsigned_tx)
    repeated Credential credentials = 3; // 4 bytes + size(credentials)
}

Signed Transaction Example

Let's make a signed transaction that uses the unsigned transaction and credentials from the previous examples.

  • CodecID: 0
  • UnsignedTx: 0x0000000100000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
  • Credentials 0x0000000900000002000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00
[
    CodecID     <- 0x0000
    UnsignedTx  <- 0x0000000100000004ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000007000000030000000400010203
    Credentials <- [
        0x0000000900000002000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00,
    ]
]
=
[
    // Codec ID
    0x00, 0x00,
    // unsigned transaction:
    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x04,
    0xff, 0xff, 0xff, 0xff, 0xee, 0xee, 0xee, 0xee,
    0xdd, 0xdd, 0xdd, 0xdd, 0xcc, 0xcc, 0xcc, 0xcc,
    0xbb, 0xbb, 0xbb, 0xbb, 0xaa, 0xaa, 0xaa, 0xaa,
    0x99, 0x99, 0x99, 0x99, 0x88, 0x88, 0x88, 0x88,
    0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x07,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x39,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02,
    0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
    0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
    0x6d, 0x55, 0xa9, 0x55, 0xc3, 0x34, 0x41, 0x28,
    0xe0, 0x60, 0x12, 0x8e, 0xde, 0x35, 0x23, 0xa2,
    0x4a, 0x46, 0x1c, 0x89, 0x43, 0xab, 0x08, 0x59,
    0x00, 0x00, 0x00, 0x01, 0xf1, 0xe1, 0xd1, 0xc1,
    0xb1, 0xa1, 0x91, 0x81, 0x71, 0x61, 0x51, 0x41,
    0x31, 0x21, 0x11, 0x01, 0xf0, 0xe0, 0xd0, 0xc0,
    0xb0, 0xa0, 0x90, 0x80, 0x70, 0x60, 0x50, 0x40,
    0x30, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x05,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
    0x07, 0x5b, 0xcd, 0x15, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03,
    0x00, 0x00, 0x00, 0x04, 0x00, 0x01, 0x02, 0x03
    // number of credentials:
    0x00, 0x00, 0x00, 0x01,
    // credential[0]:
    0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x02,
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1e, 0x1d, 0x1f,
    0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
    0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2e, 0x2d, 0x2f,
    0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
    0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
    0x00, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46,
    0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,
    0x4f, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56,
    0x57, 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5e, 0x5d,
    0x5f, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66,
    0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6e, 0x6d,
    0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76,
    0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e,
    0x7f, 0x00,

UTXO

A UTXO is a standalone representation of a transaction output.

What UTXO Contains

A UTXO contains a CodecID, TxID, UTXOIndex, AssetID, and Output.

  • CodecID The only valid CodecID is 00 00
  • TxID is a 32-byte transaction ID. Transaction IDs are calculated by taking sha256 of the bytes of the signed transaction.
  • UTXOIndex is an int that specifies which output in the transaction specified by TxID that this UTXO was created by.
  • AssetID is a 32-byte array that defines which asset this UTXO references.
  • Output is the output object that created this UTXO. The serialization of Outputs was defined above. Valid output types are SECP Mint Output, SECP Transfer Output, NFT Mint Output, NFT Transfer Output.

Gantt UTXO Specification

+--------------+----------+-------------------------+
| codec_id     : uint16   |                 2 bytes |
+--------------+----------+-------------------------+
| tx_id        : [32]byte |                32 bytes |
+--------------+----------+-------------------------+
| output_index : int      |                 4 bytes |
+--------------+----------+-------------------------+
| asset_id     : [32]byte |                32 bytes |
+--------------+----------+-------------------------+
| output       : Output   |      size(output) bytes |
+--------------+----------+-------------------------+
                          | 70 + size(output) bytes |
                          +-------------------------+

Proto UTXO Specification

message Utxo {
    uint16 codec_id = 1;     // 02 bytes
    bytes tx_id = 2;         // 32 bytes
    uint32 output_index = 3; // 04 bytes
    bytes asset_id = 4;      // 32 bytes
    Output output = 5;       // size(output)
}

UTXO Examples

Let's make a UTXO with a SECP Mint Output:

  • CodecID: 0
  • TxID: 0x47c92ed62d18e3cccda512f60a0d5b1e939b6ab73fb2d011e5e306e79bd0448f
  • UTXOIndex: 0 = 0x00000001
  • AssetID: 0x47c92ed62d18e3cccda512f60a0d5b1e939b6ab73fb2d011e5e306e79bd0448f
  • Output: 0x00000006000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
[
    CodecID   <- 0x0000
    TxID      <- 0x47c92ed62d18e3cccda512f60a0d5b1e939b6ab73fb2d011e5e306e79bd0448f
    UTXOIndex <- 0x00000001
    AssetID   <- 0x47c92ed62d18e3cccda512f60a0d5b1e939b6ab73fb2d011e5e306e79bd0448f
    Output    <- 00000006000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
]
=
[
    // codecID:
    0x00, 0x00,
    // txID:
    0x47, 0xc9, 0x2e, 0xd6, 0x2d, 0x18, 0xe3, 0xcc,
    0xcd, 0xa5, 0x12, 0xf6, 0x0a, 0x0d, 0x5b, 0x1e,
    0x93, 0x9b, 0x6a, 0xb7, 0x3f, 0xb2, 0xd0, 0x11,
    0xe5, 0xe3, 0x06, 0xe7, 0x9b, 0xd0, 0x44, 0x8f,
    // utxo index:
    0x00, 0x00, 0x00, 0x01,
    // assetID:
    0x47, 0xc9, 0x2e, 0xd6, 0x2d, 0x18, 0xe3, 0xcc,
    0xcd, 0xa5, 0x12, 0xf6, 0x0a, 0x0d, 0x5b, 0x1e,
    0x93, 0x9b, 0x6a, 0xb7, 0x3f, 0xb2, 0xd0, 0x11,
    0xe5, 0xe3, 0x06, 0xe7, 0x9b, 0xd0, 0x44, 0x8f,
    // secp mint output:
    0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x01, 0x3c, 0xb7, 0xd3, 0x84,
    0x2e, 0x8c, 0xee, 0x6a, 0x0e, 0xbd, 0x09, 0xf1,
    0xfe, 0x88, 0x4f, 0x68, 0x61, 0xe1, 0xb2, 0x9c,
    0x62, 0x76, 0xaa, 0x2a,
]

Let's make a UTXO with a SECP Transfer Output from the signed transaction created above:

  • CodecID: 0
  • TxID: 0xf966750f438867c3c9828ddcdbe660e21ccdbb36a9276958f011ba472f75d4e7
  • UTXOIndex: 0 = 0x00000000
  • AssetID: 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
  • Output: "Example SECP256K1 Transferable Output as defined above"
[
    CodecID   <- 0x0000
    TxID      <- 0xf966750f438867c3c9828ddcdbe660e21ccdbb36a9276958f011ba472f75d4e7
    UTXOIndex <- 0x00000000
    AssetID   <- 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
    Output    <-     0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
]
=
[
    // codecID:
    0x00, 0x00,
    // txID:
    0xf9, 0x66, 0x75, 0x0f, 0x43, 0x88, 0x67, 0xc3,
    0xc9, 0x82, 0x8d, 0xdc, 0xdb, 0xe6, 0x60, 0xe2,
    0x1c, 0xcd, 0xbb, 0x36, 0xa9, 0x27, 0x69, 0x58,
    0xf0, 0x11, 0xba, 0x47, 0x2f, 0x75, 0xd4, 0xe7,
    // utxo index:
    0x00, 0x00, 0x00, 0x00,
    // assetID:
    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
    0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
    0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
    0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
    // secp transfer output:
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x02, 0x03,
    0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
    0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
    0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
    0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
    0x24, 0x25, 0x26, 0x27,
]

Let's make a UTXO with an NFT Mint Output:

  • CodecID: 0
  • TxID: 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
  • UTXOIndex: 0 = 0x00000001
  • AssetID: 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
  • Output: 0x0000000a00000000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
[
    CodecID   <- 0x0000
    TxID      <- 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
    UTXOIndex <- 0x00000001
    AssetID   <- 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
    Output    <- 0000000a00000000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
]
=
[
    // codecID:
    0x00, 0x00,
    // txID:
    0x03, 0xc6, 0x86, 0xef, 0xe8, 0xd8, 0x0c, 0x51,
    0x9f, 0x35, 0x69, 0x29, 0xf6, 0xda, 0x94, 0x5f,
    0x7f, 0xf9, 0x03, 0x78, 0xf0, 0x04, 0x4b, 0xb0,
    0xe1, 0xa5, 0xd6, 0xc1, 0xad, 0x06, 0xba, 0xe7,
    // utxo index:
    0x00, 0x00, 0x00, 0x01,
    // assetID:
    0x03, 0xc6, 0x86, 0xef, 0xe8, 0xd8, 0x0c, 0x51,
    0x9f, 0x35, 0x69, 0x29, 0xf6, 0xda, 0x94, 0x5f,
    0x7f, 0xf9, 0x03, 0x78, 0xf0, 0x04, 0x4b, 0xb0,
    0xe1, 0xa5, 0xd6, 0xc1, 0xad, 0x06, 0xba, 0xe7,
    // nft mint output:
    0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01,
    0x3c, 0xb7, 0xd3, 0x84, 0x2e, 0x8c, 0xee, 0x6a,
    0x0e, 0xbd, 0x09, 0xf1, 0xfe, 0x88, 0x4f, 0x68,
    0x61, 0xe1, 0xb2, 0x9c, 0x62, 0x76, 0xaa, 0x2a,
]

Let's make a UTXO with an NFT Transfer Output:

  • CodecID: 0
  • TxID: 0xa68f794a7de7bdfc5db7ba5b73654304731dd586bbf4a6d7b05be6e49de2f936
  • UTXOIndex: 0 = 0x00000001
  • AssetID: 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
  • Output: 0x0000000b000000000000000b4e4654205061796c6f6164000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
[
    CodecID   <- 0x0000
    TxID      <- 0xa68f794a7de7bdfc5db7ba5b73654304731dd586bbf4a6d7b05be6e49de2f936
    UTXOIndex <- 0x00000001
    AssetID   <- 0x03c686efe8d80c519f356929f6da945f7ff90378f0044bb0e1a5d6c1ad06bae7
    Output    <- 0000000b000000000000000b4e4654205061796c6f6164000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c6276aa2a
]
=
[
    // codecID:
    0x00, 0x00,
    // txID:
    0xa6, 0x8f, 0x79, 0x4a, 0x7d, 0xe7, 0xbd, 0xfc,
    0x5d, 0xb7, 0xba, 0x5b, 0x73, 0x65, 0x43, 0x04,
    0x73, 0x1d, 0xd5, 0x86, 0xbb, 0xf4, 0xa6, 0xd7,
    0xb0, 0x5b, 0xe6, 0xe4, 0x9d, 0xe2, 0xf9, 0x36,
    // utxo index:
    0x00, 0x00, 0x00, 0x01,
    // assetID:
    0x03, 0xc6, 0x86, 0xef, 0xe8, 0xd8, 0x0c, 0x51,
    0x9f, 0x35, 0x69, 0x29, 0xf6, 0xda, 0x94, 0x5f,
    0x7f, 0xf9, 0x03, 0x78, 0xf0, 0x04, 0x4b, 0xb0,
    0xe1, 0xa5, 0xd6, 0xc1, 0xad, 0x06, 0xba, 0xe7,
    // nft transfer output:
    0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x0b, 0x4e, 0x46, 0x54, 0x20,
    0x50, 0x61, 0x79, 0x6c, 0x6f, 0x61, 0x64, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x3c,
    0xb7, 0xd3, 0x84, 0x2e, 0x8c, 0xee, 0x6a, 0x0e,
    0xbd, 0x09, 0xf1, 0xfe, 0x88, 0x4f, 0x68, 0x61,
    0xe1, 0xb2, 0x9c, 0x62, 0x76, 0xaa, 0x2a,
]

GenesisAsset

An asset to be issued in an instance of the AVM's Genesis

What GenesisAsset Contains

An instance of a GenesisAsset contains an Alias, NetworkID, BlockchainID, Outputs, Inputs, Memo, Name, Symbol, Denomination, and InitialStates.

  • Alias is the alias for this asset.
  • NetworkID defines which network this transaction is meant to be issued to. This value is meant to support transaction routing and is not designed for replay attack prevention.
  • BlockchainID is the ID (32-byte array) that defines which blockchain this transaction was issued to. This is used for replay attack prevention for transactions that could potentially be valid across network or blockchain.
  • Outputs is an array of transferable output objects. Outputs must be sorted lexicographically by their serialized representation. The total quantity of the assets created in these outputs must be less than or equal to the total quantity of each asset consumed in the inputs minus the transaction fee.
  • Inputs is an array of transferable input objects. Inputs must be sorted and unique. Inputs are sorted first lexicographically by their TxID and then by the UTXOIndex from low to high. If there are inputs that have the same TxID and UTXOIndex, then the transaction is invalid as this would result in a double spend.
  • Memo is a memo field that contains arbitrary bytes, up to 256 bytes.
  • Name is a human readable string that defines the name of the asset this transaction will create. The name is not guaranteed to be unique. The name must consist of only printable ASCII characters and must be no longer than 128 characters.
  • Symbol is a human readable string that defines the symbol of the asset this transaction will create. The symbol is not guaranteed to be unique. The symbol must consist of only printable ASCII characters and must be no longer than 4 characters.
  • Denomination is a byte that defines the divisibility of the asset this transaction will create. For example, the AVAX token is divisible into billionths. Therefore, the denomination of the AVAX token is 9. The denomination must be no more than 32.
  • InitialStates is a variable length array that defines the feature extensions this asset supports, and the initial state of those feature extensions.

Gantt GenesisAsset Specification

+----------------+----------------------+--------------------------------+
| alias          : string               |           2 + len(alias) bytes |
+----------------+----------------------+--------------------------------+
| network_id     : int                  |                        4 bytes |
+----------------+----------------------+--------------------------------+
| blockchain_id  : [32]byte             |                       32 bytes |
+----------------+----------------------+--------------------------------+
| outputs        : []TransferableOutput |        4 + size(outputs) bytes |
+----------------+----------------------+--------------------------------+
| inputs         : []TransferableInput  |         4 + size(inputs) bytes |
+----------------+----------------------+--------------------------------+
| memo           : [256]byte            |           4 + size(memo) bytes |
+----------------+----------------------+--------------------------------+
| name           : string               |            2 + len(name) bytes |
+----------------+----------------------+--------------------------------+
| symbol         : string               |          2 + len(symbol) bytes |
+----------------+----------------------+--------------------------------+
| denomination   : byte                 |                        1 bytes |
+----------------+----------------------+--------------------------------+
| initial_states : []InitialState       | 4 + size(initial_states) bytes |
+----------------+----------------------+--------------------------------+
|           59 + size(alias) + size(outputs) + size(inputs) + size(memo) |
|                 + len(name) + len(symbol) + size(initial_states) bytes |
+------------------------------------------------------------------------+

### Proto GenesisAsset Specification

```text
message GenesisAsset {
    string alias = 1;                          // 2 bytes + len(alias)
    uint32 network_id = 2;                     // 04 bytes
    bytes blockchain_id = 3;                   // 32 bytes
    repeated Output outputs = 4;               // 04 bytes + size(outputs)
    repeated Input inputs = 5;                 // 04 bytes + size(inputs)
    bytes memo = 6;                            // 04 bytes + size(memo)
    string name = 7;                           // 2 bytes + len(name)
    name symbol = 8;                           // 2 bytes + len(symbol)
    uint8 denomination = 9;                    // 1 bytes
    repeated InitialState initial_states = 10; // 4 bytes + size(initial_states)
}

GenesisAsset Example

Let's make a GenesisAsset:

  • Alias: asset1
  • NetworkID: 12345
  • BlockchainID: 0x0000000000000000000000000000000000000000000000000000000000000000
  • Outputs: []
  • Inputs: []
  • Memo: 2Zc54v4ek37TEwu4LiV3j41PUMRd6acDDU3ZCVSxE7X
  • Name: asset1
  • Symbol: MFCA
  • Denomination: 1
  • InitialStates:
  • "Example Initial State as defined above"
[
    Alias         <- 0x617373657431
    NetworkID     <- 0x00003039
    BlockchainID  <- 0x0000000000000000000000000000000000000000000000000000000000000000
    Outputs       <- []
    Inputs        <- []
    Memo          <- 0x66x726f6d20736e6f77666c616b6520746f206176616c616e636865
    Name          <- 0x617373657431
    Symbol        <- 0x66x726f6d20736e6f77666c616b6520746f206176616c616e636865
    Denomination  <- 0x66x726f6d20736e6f77666c616b6520746f206176616c616e636865
    InitialStates <- [
        0x0000000000000001000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
    ]
]
=
[
    // asset alias len:
    0x00, 0x06,
    // asset alias:
    0x61, 0x73, 0x73, 0x65, 0x74, 0x31,
    // network_id:
    0x00, 0x00, 0x30, 0x39,
    // blockchain_id:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    // output_len:
    0x00, 0x00, 0x00, 0x00,
    // input_len:
    0x00, 0x00, 0x00, 0x00,
    // memo_len:
    0x00, 0x00, 0x00, 0x1b,
    // memo:
    0x66, 0x72, 0x6f, 0x6d, 0x20, 0x73, 0x6e, 0x6f, 0x77, 0x66, 0x6c, 0x61,
    0x6b, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x61, 0x76, 0x61, 0x6c, 0x61, 0x6e, 0x63, 0x68, 0x65,
    // asset_name_len:
    0x00, 0x0f,
    // asset_name:
    0x6d, 0x79, 0x46, 0x69, 0x78, 0x65, 0x64, 0x43, 0x61, 0x70, 0x41, 0x73, 0x73, 0x65, 0x74,
    // symbol_len:
    0x00, 0x04,
    // symbol:
    0x4d, 0x46, 0x43, 0x41,
    // denomination:
    0x07,
    // number of InitialStates:
    0x00, 0x00, 0x00, 0x01,
    // InitialStates[0]:
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
    0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
    0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
    0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
    0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
    0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
    0x43, 0xab, 0x08, 0x59,
]

Last updated on

On this page

Codec IDTransferable OutputWhat Transferable Output ContainsGantt Transferable Output SpecificationProto Transferable Output SpecificationTransferable Output ExampleTransferable InputWhat Transferable Input ContainsGantt Transferable Input SpecificationProto Transferable Input SpecificationTransferable Input ExampleTransferable OpWhat Transferable Op ContainsGantt Transferable Op SpecificationProto Transferable Op SpecificationTransferable Op ExampleOutputsSECP256K1 Mint OutputWhat SECP256K1 Mint Output ContainsGantt SECP256K1 Mint Output SpecificationProto SECP256K1 Mint Output SpecificationSECP256K1 Mint Output ExampleSECP256K1 Transfer OutputWhat SECP256K1 Transfer Output ContainsGantt SECP256K1 Transfer Output SpecificationProto SECP256K1 Transfer Output SpecificationSECP256K1 Transfer Output ExampleNFT Mint OutputWhat NFT Mint Output ContainsGantt NFT Mint Output SpecificationProto NFT Mint Output SpecificationNFT Mint Output ExampleNFT Transfer OutputWhat NFT Transfer Output ContainsGantt NFT Transfer Output SpecificationProto NFT Transfer Output SpecificationNFT Transfer Output ExampleInputsSECP256K1 Transfer InputWhat SECP256K1 Transfer Input ContainsGantt SECP256K1 Transfer Input SpecificationProto SECP256K1 Transfer Input SpecificationSECP256K1 Transfer Input ExampleOperationsSECP256K1 Mint OperationWhat SECP256K1 Mint Operation ContainsGantt SECP256K1 Mint Operation SpecificationProto SECP256K1 Mint Operation SpecificationSECP256K1 Mint Operation ExampleNFT Mint OpWhat NFT Mint Op ContainsGantt NFT Mint Op SpecificationProto NFT Mint Op SpecificationNFT Mint Op ExampleNFT Transfer OpWhat NFT Transfer Op ContainsGantt NFT Transfer Op SpecificationProto NFT Transfer Op SpecificationNFT Transfer Op ExampleInitial StateWhat Initial State ContainsGantt Initial State SpecificationProto Initial State SpecificationInitial State ExampleCredentialsSECP256K1 CredentialWhat SECP256K1 Credential ContainsGantt SECP256K1 Credential SpecificationProto SECP256K1 Credential SpecificationSECP256K1 Credential ExampleNFT CredentialUnsigned TransactionsUnsigned BaseTxWhat Base TX ContainsGantt Base TX SpecificationProto Base TX SpecificationBase TX ExampleUnsigned CreateAssetTxWhat Unsigned Create Asset TX ContainsGantt Unsigned Create Asset TX SpecificationProto Unsigned Create Asset TX SpecificationUnsigned Create Asset TX ExampleUnsigned OperationTxWhat Unsigned Operation TX ContainsGantt Unsigned Operation TX SpecificationProto Unsigned Operation TX SpecificationUnsigned Operation TX ExampleUnsigned ImportTxWhat Unsigned Import TX ContainsGantt Unsigned Import TX SpecificationProto Unsigned Import TX SpecificationUnsigned Import TX ExampleUnsigned ExportTxWhat Unsigned Export TX ContainsGantt Unsigned Export TX SpecificationProto Unsigned Export TX SpecificationUnsigned Export TX ExampleSigned TransactionWhat Signed Transaction ContainsGantt Signed Transaction SpecificationProto Signed Transaction SpecificationSigned Transaction ExampleUTXOWhat UTXO ContainsGantt UTXO SpecificationProto UTXO SpecificationUTXO ExamplesGenesisAssetWhat GenesisAsset ContainsGantt GenesisAsset SpecificationGenesisAsset Example
Edit on Github